How to Fix a Running Toilet
A running toilet can be an annoyance to your day-to-day life, but it can also be a waste of water and money. Whether you’re dealing with a small leak or a constantly running toilet, it’s important to tackle the issue as soon as possible. Luckily, with a little know-how, fixing a running toilet can be a fairly simple and straightforward process. In this article, we’ll go over the steps necessary to fix a running toilet, so you can save water and money – and get back to your normal routine in no time.
Step 1: Turn off the Water Supply
Before you begin, it’s important to shut off the water supply to your toilet. This can be done by turning off the valve located at the base of the toilet. If you’re having trouble locating the valve, you can also turn off the main water supply to your house.
Step 2: Check the Flapper
The flapper is a rubber piece located at the bottom of the toilet tank. It’s the part that lifts when you flush, allowing water to rush into the bowl. If the flapper is worn or misaligned, it can cause water to continuously leak into the bowl. To check the flapper, simply lift the lid off the tank and flush the toilet. Watch to see if the flapper seals correctly and if it doesn’t, it’s time to replace it. The flapper should be aligned with the opening and put back in place.
Step 3: Check the Fill Valve
The fill valve controls the water that refills the tank after you flush. If it’s not adjusted correctly, it can cause your toilet to run continuously. To check the fill valve, look for a float that rises and falls with the water level. If it’s set too high, it may cause the valve to keep running. You can adjust the float by tightening or loosening a screw located at the base of the float arm.
Step 4: Check the Chain
A chain located at the back of the toilet connects the flapper and the handle. If the chain is too long or too short, it can cause the toilet to constantly run. Adjusting the chain is a simple fix – simply move the clip on the chain to make it tighter or looser, depending on what the issue is.
Step 5: Call a Professional
If you’ve followed these steps and are still unable to fix your running toilet, it’s time to call a professional plumber. They have the experience and tools necessary to diagnose and fix any underlying issues with your toilet.
Contact the Pacific Flood Restoration Team Today for More Tips!
While a running toilet can be frustrating, it’s also fixable. By following these simple steps, you should be able to diagnose and repair any issues causing your toilet to continuously run. If you’re still having trouble, don’t hesitate to reach out to a professional plumber for assistance. Fixing a running toilet can save you a significant amount of water and money, so it’s important to take care of the problem as soon as possible. Remember to always turn off the water supply before beginning any repairs!
Discover the top-tier restoration services you need right here in San Diego at Pacific Flood Restoration. Our gallery showcases our past work, giving you a glimpse of what we can do for your home or business. Get in touch with our expert team today at 760-815-3033 to learn more and schedule a consultation.